Gasboy Fleet Head Office System - Manual (Page 362)

360
5. Turn on the WP; follow the instructions appearing on the WP display, described in
Table C-1
NOTE
When operating the WP for the first time, enter
factory defaults user name and password: "admin",
the device will prompt the user for a new username
and password.
Table C-1. WP Upgrade Sequence
Step Display Description/Action
1 Enter User ID and press
ENTER
Enter password and press
ENTER. Press the
BCK key
2 The System menu is displayed
3 Use the DOWN arrow key to move the pointer
(
>) to the Sys Functions menu and press
ENTER
4 Press
ENTER
5 Press
SEND
6 Wait while the PC connects to the FHO.
6. The WP tunnel displays the session details. After the WP is successfully recognized
by the FHO, the application registers the device serial number and the currently
logged user name and sends to the WP the organization's name (company name). A
confirmation message is displayed (see Figure C-8)
FMS and FHO User’s Manual - MDE-4821