Gasboy Fleet Head Office System - Manual (Page 315)

313
• Click Unacknowledged Alarm to display a summary of currently active alarms – any alarm
that is not ended or ended and was not acknowledged is listed in the grid
• Check Alarm History to see alarms that are both ended and acknowledged
When an alarm is acknowledged (by clicking on it), user prompt box appears, enabling the user to
enter a free comment that explains the act (see Figure 13-3). The comment and the user who
performed the operation are saved in the database.
Figure 13-3. Alarm Comment Entry Screen
It is possible to acknowledge a specific alarm, the page displayed, or all alarms.
Users cannot acknowledge an alarm that it is already acknowledged (see Figure 13-4).
Figure 13-4. Alarm Already Acknowledge Message
Occasionally, it is required to force end alarm. For example, a communication error with a station
that is not longer in the system. Select the alarm and click the ‘Force End Alarm’ button. The alarm
is acknowledged and forced to end (See Figure 13-5).
Figure 13-5. Alarm will be Ended and Acknowledged Message
13.3.1. List of Alarms
The types of alarms available in the system are (see Table 13-2):
a. System Alarms: such as technical failure with site (e.g. no communication) or
technical failure in the site (e.g. bad device, OrPT, no paper in printer, TLG
errors, Etc.)
FMS and FHO User’s Manual - MDE-4821