Gasboy Atlas Single Std. Inlet Centering Kit User Manual
Gasboy Hardware

MDE-4637A Single Standard Pump/Dispenser Inlet Centering Kit (M07676K00X) Installation for Atlas™ Units · August 2007
Page 1
Introduction
Purpose
The purpose of the Single Standard Pump/Dispenser Inlet Centering Kit (M07676K00X) is to
provide a method for centering the product inlet on standard Atlas
™
single product models
during unit installation. This will provide the unit with a 2 inch NPT-centered connection, and
it can be used on Atlas single product or Twin 1 product (TW1) models.
Table of Contents
Topic
Page
Kits
Part Number
Description
M07676K001
Atlas Standard Dispenser Inlet Centering Kit
M07676K002
Atlas Standard Pump Inlet Centering Kit
Required Tools
The following tools are required for the installation of M07676K00X kits:
• Allen Wrench, Metric
• Gloves, Rubber
• Grease, Silicone
• Ratchet Set, Metric
• Wrench Set, Metric Open-end
Parts List
The following table lists the parts included in the Single Standard Dispenser Inlet Centering
kit (M07676K001).
Item
Description
Part Number
Quantity
1
Inlet Manifold
M05347B010
1
2
M10 X 25 Socket Head Screw
M04973B005
6
3
M10 Lock washer
M01071B001
6
4
Gasket
M06101B001
2
5
Dispenser Manifold Blanking Spacer
M07671B001
1
MDE-4637A
Single Standard Pump/Dispenser Inlet Centering
Kit (M07676K00X) Installation for Atlas
™
Units
August 2007