Scheduling automatic exports – Gasboy Fleet Head Office System User Manual
Page 230
228
Table 8-10. DP Export Fields
Field Name
Description
Interface Type
Diagnostics interface type
Interface
Description
Diagnostics interface description
ECU Address
Address of the Electronic Control Unit that reported the
error
Error Code
Error ID as reported by vehicle diagnostics
Fault Status
Error status: Active/Inactive
FMI
Failure Mode Identifier code (heavy vehicles)
Ocurrence Count
Number of errors reported for the vehicle.
Note: In txt/csv outputs, if more than one error was
reported, the export will genenrate duplicate lines for
each erro
Error Code
Description
Error description as provided by vehicle diagnostics
ECU Address
Description
Description of the Electronic Control Unit that reported the
error
FMI Description
Failure Mode Identifier description (heavy vehicles)
8.5.6.2. Scheduling Automatic Exports
DP Export can be scheduled to run automatically at predefined time intervals. Exports with
different templates or the same template filtered by different fleets can be programmed.
The Automatic Export grid displays all defined exports, along with their status, the template used,
the target and target properties.
To schedule an automatic export, proceed as follows:
7. In the Automatic Exports section, click
New. The Automatic Export dialog appears (see
FMS and FHO User’s Manual - MDE-4821