Gasboy Fleet Head Office System - Manual (Page 180)

178
Figure 7-36. Device Properties Screen – Format Tab
7.10.1.6. New Device – Two Stage Tab
Selecting the Two Stage tab displays the Device Two Stage screen (see Figure 7-37).
This tab is active only when defining a vehicle device. This tab allows connecting the vehicle
device to a specific driver or a group of drivers.
In cases where the Two-Stage authorization is selected, the driver is prompted to present Driver ID
tag or manually enter Driver ID through OrPT keypad.
NOTE
Maximum number of characters for manual entry
into OrPT is 20.
The user can select the
Specific radio button and select a name from the list or the Departments
button to select the Default or any other departments. As an option,
Any driver in same fleet or
Any driver in any fleet radio buttons are available to allow all fleet drivers or all drivers in any
fleet to refuel this vehicle respectively.
A device must be saved before users can apply the Two-Stage option.
Two-stage required for non-vehicle mounted entry only: If checked, Two-Stage authorization is
required only in cases where the vehicle mounted device was not recognized and the transaction is
initiated from the OrPT (using the station proxy device, manual entry or Driver ID tag).
FMS and FHO User’s Manual - MDE-4821