Gasboy Fleet Head Office System - Manual (Page 229)

227
e. Double-click on the
Precision field to select a different number of decimal digits of
precision from a list (for .csv or .txt output only)
3. Select the output type from the
Format drop-down: csv, txt or xml
4. (Optional) Select the field delimiter character from the
Select Delimiter drop-down (for .csv
output only)
5. (Optional) Select the
Decimal Point notation from the drop-down
NOTE
Do not select a comma as a decimal point notation,
if commas were selected as field delimiters.
6. (Optional) Select the
Print column name checkbox to include the field Name in the export
file
7. Click
Save to save the settings
To remove a field from the report, click on the row in the right hand side grid and then click
Remove.
Table 8-10. DP Export Fields
Field Name Description
Auxiliary1
Utility Engine #1 EH current reading
Auxiliary2
Utility Engine #2 EH current reading
DP ID
Record ID
DP Timestamp
Timestamp of the reading
EngineHours
Current number of engine hours
FleetCode
4 digits fleet code programmed into the DP
Fuel Consumed
Fuel consumption delta between current and previous
readings
Fuel Level
Current reading of fuel level
Idle Time Events
Number of times the vehicle was idle between current and
previous readings
Idle Time
Accumulated idle time between current and previous
readings. Idle time counter starts whenever the speed is zero
while the vehicle's engine is running for a period longer than
X consecutive minutes, as programmed into the DP
Odometer
Current odometer reading
Over RPM Events
Number of times the vehicle crossed the RPM limit as
programmed into the DP. Delta between current and
previous readings
Over Speeding
Duration
Accumulated time that the driver drove over the speed limit
as set for the DP. Delta between current and previous
readings
PTO
Current number of Power take-off operating hours
Vehicle ID
License plate number
FMS and FHO User’s Manual - MDE-4821