Gasboy 8800E - Manual

031656 Rev. 04/08/03
FRONT AND SIDE EXTERIOR VIEWS
FOR PRESETS
1. Select preset type
3. Press Enter
2. Enter preset amount
PUMP PAINT AND GRAPHICS FORM - SERIES 8800E
CUSTOMER: ORDER #:
1. SELECT FINISH OPTIONS:
!
PUMP SHOULD BE FINISHED WITH STANDARD PAINT AND GRAPHICS (COMPLETE
SECTION 2 BELOW)
!
PUMP SHOULD BE FINISHED WITH CUSTOM PAINT AND GRAPHICS (COMPLETE
SECTIONS 2 & 3 BELOW)
2. COMPLETE DECIMAL POINT CONFIGURATION:
CHECK THE DESIRED TOTAL SALE/PRICE COMBINATION
TOTAL SALE xxxx.xx xxxxxx xxxxx.x xxxxxx xxxxxx xxxxx.x xxxx.xx xxxx.xx
PRICE x.xxx xxx.x xxx.x xxxx xx.xx x.xxx xx.xx xxx.x
MEMS ? YES 1 YES 2 NO NO NO NO YES 1 NO
NOTE: MEMS ? in the above table indicates compatibility with MEMS console: YES 1 = compatible with xxx.xxx volume display;
YES 2 = compatible with xxxx.xx volume display.
CHECK THE DESIRED VOLUME DISPLAY
xxxxx.x
xxxx.xx
xxx.xxx (Not available on 8850E models)
Complete Step 3 for custom paint and graphics only.
3. CUSTOM PAINT AND GRAPHICS SPECIFICATIONS:
The diagrams below and on the reverse side show the standard layouts. Complete the back of this sheet for custom
graphics.
Bezel portion of dial enclosure and base of dispenser are always black.
Standard exterior panel colors:
white front and rear doors, black top and sides.
If your unit has the keypad option, standard (English) text is shown below.
Enter any translation required on the lines at the right.
________________________________
________________________________
________________________________
________________________________