Gasboy 9120K - Manual

MDE-4618 9120K Pulser Installation Instructions • December 2006 Page 1
Introduction
Purpose
This manual provides instructions for the installation of 9120K Pulser Kits - M070787K003
(1:1), M07087K001 (10:1), and M07087K002 (100:1).
Table of Contents
Topic Page
Introduction 1
Purpose 1
Table of Contents 1
Required Tools 1
Parts List 2
Warranty 2
Important Safety Information 3
Installation of the 9120K Pulser Kit 5
Required Tools
The following tools are required for the installation of 9120K Pulser Kits:
• Phillips ® screwdriver
• Straight blade screwdriver
• 7 mm wrench
• 13 mm wrench
• Drift punch
• Needle-nosed pliers
MDE-4618
9120K Pulser Installation Instructions
December 2006