Gasboy Fleet Head Office System - Manual (Page 351)

349
device “From authorization
mean”, 3 in the DB “Use” (only
in cases the previous value is
defined, Device Properties –
Validation Tab)
29 Nr_pin_retries Integer (1) Number of allowed PIN code
entry retries, 0 for unlimited
(Device Properties – Validation
Tab)
30 Block_if_pin_retries_fail Integer (1) Enables device blocking if all
PIN code entry allowed retries
fail: 0 for disabled, 1 for enabled
(Device Properties – Validation
Tab)
31 OrPT_prompt_for_plate Integer (1) Prompting for vehicle number
entry and verification option: 0
for disabled, 1 for enabled
(Device Properties – Validation
Tab)
32 OrPT_prompt_for_odomet
er Integer (1) Prompting for odometer reading
entry option: 0 for disabled, 1
for enabled (Device Properties –
Validation Tab)
33 Do_odometer_reasonabilit
y_check Integer (1) Odometer reasonability check
option: 0 for disabled, 1 for
enabled (Device Properties –
Validation Tab)
34 Max_odometer_delta_allo
wed Integer (1) Maximum difference between
the previous and the current
odometer reading (Device
Properties – Validation Tab)
35 Nr_odometer_retries Integer (1) Amount of retries before
odometer entry fails the
reasonability check: 0 for
unlimited (Device Properties –
Validation Tab)
36 Engine_hours N/A (the current value of the
Engine Hour is entered through
the OrPT)
37 Original_engine_hours Integer (1) 0 (this value must not be
modified)
38 Target_engine_hours Integer (1) 0 (this value must not be
FMS and FHO User’s Manual - MDE-4821