Price history, Manual stations data entry, Figure 11-6. price history screen – Gasboy Fleet Head Office System User Manual
Page 277

275
5. Select the stations to which the price update is to be applied by selecting the following radio
buttons:
a.
Only Station: To select the station chosen in the Price Update Screen
b.
Selected Stations: To display a grid containing all stations. Select the checkboxes
for all required stations,
c.
Selected Clusters: To display a grid containing all clusters. Select the checkboxes
for all required clusters,
6. To select all the stations/clusters, click on the
Select All button, to reset the selection click
on the
Unselect All button
7. Click
OK to save changes and close the dialog box, or Cancel to close the dialog box
without saving the changes
The user is notified via an alarm in cases where the update process has failed for any of the stations.
11.4.1.
Price History
The history screen shows the price update history and changes for different products.
To view all price update history per product, select the product from the grid and click History (see
Figure 11-6).
Figure 11-6. Price History Screen
11.5. MANUAL STATIONS DATA ENTRY
To access the Manual Entry screen
, select the Manual Entry tab (see Figure 11-7).
The screen is relevant for manual stations only (indicated by a flag); and it enables the user to add
or view shifts related data, pump reading, tank readings, and transactions. The tab is grayed out if
no manual station is configured in the system. A manual station cannot be added if the threshold for
the HASP key has been reached.
To create a new shift, enter the Start date, the application adds automatically the End date (24
hours) and Start and End times (Default: Midnight). Even though the user can change these shift
default parameters.
The system automatically displays on the screen all station's pumps and tanks.
FMS and FHO User’s Manual - MDE-4821