Tanks gauge, Tank head on-line data – Gasboy Fleet Head Office System User Manual
Page 272

270
11.2.1.1. Tanks Gauge
The four-tank Gauges (see Figure 11-1) have two functions:
a. Switching between the six groups of four tanks, by clicking on the applicable gauge.
b. Indicating whether a fuel tank is currently specified. Each gauge contains four indicators,
each representing a tank (the leftmost is the first tank in the group and the rightmost is the
last one). The color indications are as follows:
a. Gray:
no tank is assigned to an indicator
b. Blue:
tank is Idle
11.2.1.2. Tank Head On-Line Data
The Tank On-Line Data is displayed in six text boxes and a single indicator. The tank fuel volume
is displayed in real-time. The textual information displayed online is as follows:
a. Fuel Level:
Displays the fuel level in the tank
b. Fuel Volume: The fuel volume remained so far
c. Water Level: Displays the water level in the fuel tank
d. Temp:
Displays the temperature inside the fuel tank
e. Density at 15
0
C: Displays the fuel density in lb/ft
3
at this temperature
f. Flow Rate:
Flow rate calculated over a period of time as defined in the setup. The units
are volume per hour and it is based on two measurement points over the
defined period. A negative value indicates level drop
Some of the data may not be available depending on the TLG type and probes (such as density).
If the TLG reports on delivery status, a relevant indication appears.
FMS and FHO User’s Manual - MDE-4821