Product mapping tab, Figure 6-22. matching the station products – Gasboy Fleet Head Office System User Manual
Page 111

109
6.5.2.5. Product Mapping Tab
Several products in various gas stations may have different products codes. Therefore, they must be
associated with the products defined in the system so as to appear correctly in the system reports:
• Select the Product Mapping tab (see Figure 6-22) after adding a new station.
Figure 6-22. Matching the Station Products
To match the products, proceed as follows:
1. In the right-hand side of the window (Head Office), select the products corresponding to the
products listed in the left-hand side of the window (Station)
2. To select new products, double click the Name header in the Head Office table, and a drop
down list of available products in Head Office appears
3. Enter the same code number for the same product in both Code columns
4. Click Update in cases where modifying an existing station
5. Click Save in cases where adding a new station
6. Click Cancel if both columns are identical and the procedure is not necessary.
In cases where adding a new station, if the mapping process is canceled, the station is still
added. Though, no connection to the station is possible until mapping is completed. The Do
Map field displays Not done (refer to paragraph 6.5.1.1).
FMS and FHO User’s Manual - MDE-4821