Gasboy 9800A - Manual

MDE-4863 Gasboy® 9800A or 2600A Pump Interface Kits Installation Instructions · October 2009 Page 1
Introduction
Purpose
This document provides installation instructions for Gasboy ® 9800A/2600A Pump Interface
Kits.
Table of Contents
Topic Page
Introduction 1
Important Safety Information 3
Installation of the 9800A/2600A Pump Interface Kit 5
Pulse-out I/F Board (M06587A001) Jumper Settings 9
Required Tools
The following tools are required for the installation of the kits:
• Phillips ® Screwdriver
• Wrench
Parts List
The following table lists the parts included in the Pump Interface Kits, C06482 and C07357.
Quantity
Item Description Part Number C06482 C07357
1 Pump I/F PCB M06587A001 1 1
2 Standoff, M/F 6-32 3/4” C08381 2 2
3 Washer, #6 External Tooth 068843 2 2
4 Screw, 6-32 x 3/8 C08759 2 2
Note: The C07357 kit is for use on single-sided dispensers only.
MDE-4863
Gasboy ® 9800A or 2600A Pump Interface Kits
Installation Instructions
October 2009