Gasboy Fleet Head Office System - Manual (Page 177)

175
The transaction is saved with the vehicle details as the main transaction device for billing and rules
calculation, the proxy device data is saved also in each transaction for controlling purposes.
The following validation options are available:
a.
Verify as valid Vehicle no., and authorize for fueling (by proxy):Verifies that the vehicle
number exists in the vehicle list of the system
b.
Verify as valid Device name, and authorize for fueling (by proxy): Verifies that the
device name exists in the system
c.
Save entry as is without verification (and authorize current device): Does not verify the
data entered with the lists. In this case the proxy device remains as the main transaction
device and the entered number is saved in the vehicle number field in the transaction record
d.
Verify entry as Vehicle no. of current device (and authorize): Verifies the vehicle
number burned on the proxy device. This option does not record the actual refueling vehicle
number
Retries: Enter the number of retries allowed (numeric integer). Fueling is still authorized even
if the user exceeds the number of incorrect retries unless the next text box is selected.
Block if all retries fail: Select this checkbox to block the transaction in cases where the user
exceeds the number of incorrect inputs defined in the
Retries text box.
Prompt for additional fields on OrPT for all transaction types: If checked, the system
requests the defined validation parameters also for vehicle mounted devices, which otherwise
start the transaction without driver interaction with the payment terminal.
By default (checkbox unmarked), the system prompts the driver only if the transaction started
from OrPT.
This feature is mainly intended for vehicles equipped with FuelOpass only.
NOTE
The OrPT
displays the validation prompt along with
the relevant pump number (see Figure 7-35). This
procedure requires setting the association of the
dispenser to a specific OrPT terminal for message
presentation (please refer to SiteOmat Setup and
Maintenance Manual MDE-4817 – Section 7.11.)
Enter Odometer
For Pump 3
Figure 7-35. Validation Prompt Including Pump Number
FMS and FHO User’s Manual - MDE-4821