Gasboy Fleet Head Office System - Manual (Page 243)

241
l.
Total Idle Time Events: Number of times the vehicle's engine was idled
m.
Total RPM Events: Number of times the vehicle crossed the RPM limit as set for
the vehicle
n.
Total Over-Speeding Duration: Accumulated time that the driver was driving over
the speed limit as set for the vehicle (HH:MM)
o.
Tank1 Fuel Level %: Tank #1 last reading of fuel level in percentage. This value is
available only in cases where the vehicle's tank capacity value was specified when
defining the vehicle/vehicle model
p.
Tanks1 Fuel Level (gal): Tank #1 last reading of fuel volume
In order to receive further data on a vehicle, click on the required vehicle row in the upper grid
.
• Error Codes Detailed Report: the bottom grid displays detailed data on the errors
presented by the vehicle selected from the Vehicle Accumulative Data grid, including the
following fields:
a.
Source: Error reporting source unit. The source represents the diagnostics
connector interface type, as follows:
• ECU stands for OBD II
• MID stands for J1587
• SA stands for J1939
b.
Error Code: Error description and error code as received from the vehicle's
diagnostics
c.
FMI: Failure Mode Identifier. Additional code and description of the error.
Included in heavy vehicles only
d.
Status: Heavy vehicles error reports status: 0=Active/ 1=Inactive. Not available
for OBD II
e.
Count: Error occurrence count
f.
Urgency: Error urgency level, as defined by the user (1 to 5, when 5 represents the
lowest and default priority)
8.6.2.4. OBD Data Functional Buttons
The OBD Data screen includes additional features that can be activated by clicking on the relevant
buttons located on the bottom part of the screen.
These include:
a.
Print: This button enables users to print the Errors report. The report includes the
vehicles accumulative data
b.
Export/ Import: Currently N/A
FMS and FHO User’s Manual - MDE-4821