Apple Logic Pro X - Manual (Page 522)

Chapter 16 Mix a project 522
Open the Binaural Panner
1 Click-hold the channel strip’s Output slot (on mono or stereo channels), then choose Binaural
from the pop-up menu.
The Binaural Pan control replaces the Pan knob.
2 Double-click the Binaural Pan control to open the Binaural Panner.
Control the binaural pan position
1 Drag the left or right puck (panning pucks) to make the stereo image wider or narrower.
The pucks also work on a second axis—up and down—relative to the third puck.
2 Drag the third puck (the direction puck) to determine the forward and backward direction.
As you adjust the direction puck, the two panning pucks move accordingly. The Angle, Elevation,
Distance, and Spread values also change.
3 Select the Mode (virtual shape) of the planning plane:
•
If set to Planar, the panning results are shown on a flat circular plane.