Apple Logic Pro X - Manual (Page 196)

Chapter 7 Work with tracks 196
Export all tracks as audio files
1 Choose File > Export > All Tracks as Audio Files.
2 Enter a name for the exported audio files, and browse to a location to save them.
3 Choose a file format for the exported audio files from the Save Format pop-up menu.
4 Choose the bit depth for the exported audio file from the Bit Depth pop-up menu.
5 Set the following parameters, as necessary:
•
Multi-Output Software Instruments: For software instrument tracks with multi-output software
instruments, choose one of the following options:
•
One File per Track: Mixes the multi-output signals with the main output into one file, for each
multi-output software instrument track. In situations where multiple tracks use the same
multi-output software instrument channel strip, one file is created for each track.
•
One File per Channel Strip: Creates additional files for each aux channel strip that has a multi-
output of the selected track’s multi-output software instrument as Input source.
•
Bypass Effect Plug-ins: Select to disable all plug-ins on the source track.
•
Include Audio Tail: Select to extend the length of the created file to include any instrument
release and potential effect tail (reverb, delay, and so on).
•
Include Volume/Pan Automation: Select to have volume and pan automation performed
on export, with their result influencing the created file. Otherwise, the volume and pan
automation is simply copied, but not performed.
Note: If you plan to use the exported regions with an external application for processing,
mixing, or editing, exporting them with no volume and pan automation is generally desirable.
•
Normalize: Choose one of the following options:
•
Off: The exported file is not normalized.
•
Overload Protection Only: Allows downward normalization in case of overloads—levels above
0 dB, which would lead to clipping—but no normalization in case of lower levels.
•
On: The exported file is normalized both for overloads and for lower levels.
6 Select the Add resulting files to Project Audio Browser checkbox to add the exported file to the
Project Audio Browser.
7 Click Save.