Apple Logic Pro X - Manual (Page 159)

Chapter 6 Work with projects 159
5 Do one of the following:
•
To add the selected data to the current project: Click the Add button (or hold down Command
while pressing the Down Arrow key).
The tracks are added below the selected track in the Tracks area.
•
To replace the data of the currently selected track with the selected data from the other project:
Click the Replace button.
Note: The Replace function only works when data on a single row is selected—not with
multiple row selections.
Import settings from another project
1 Do one of the following:
•
Choose File > Project Settings > Import Project Settings (or use the corresponding key
command, default: Option-Command-I).
•
Click the All Files tab in the Browser.
2 Locate and select the project from which you want to import settings, then click Import.
Note: If accessing the settings from the Browser tab, you also need to click the Import Project
Settings button, which appears after you click the Import button.
3 In the Import Settings window, select the settings you want to import by selecting the relevant
checkboxes, then click Import.
The settings are imported into the active project.