Apple Logic Pro X - Manual (Page 381)

Chapter 13 Add a drummer to your project 381
Adjust mic settings (Producer Kits only)
In the Edit panel, do any of the following:
m To include the sound in the mic of the other kit pieces: Turn the Leak switch on.
This turns microphone bleed on or off, where the sound of a kit piece is picked up by the
different mics from other kit pieces.
m To include the kit piece’s overhead mic in the sound: Turn the Overheads switch on.
This turns the overhead mic for the selected kit piece on or off.
m To choose between two different room microphone setups: Choose between rooms A and B. You can
also turn the room microphones off.
Rooms A and B determine which room mic setup is used with the kit piece.
Adjust the volume of other percussion instruments
1 Click the disclosure triangle at the bottom-left corner of the plug-in window to show
additional settings.
2 Drag the slider (or drag vertically in the field) to adjust the volume of the corresponding
instrument:
•
Shaker Gain
•
Tambourine Gain
•
Claps Gain
•
Cowbell Gain
•
Sticks Gain