HP Storage Essentials NAS Manager Software - Manual (Page 99)

Storage Essentials 5.00.01 User Guide 69
Discovering Sun StorEdge 6920 Storage Systems
Discovery from HP SIM
To discover Sun StorEdge 6920 storage systems, provide the following information in HP Insight
Manger:
• IP address or system name of the Sun StorEdge 6920 you want to discover. See ” Adding an IP
Range for Scanning ” on page 23 or ” Adding a Single IP Address or DNS Name for Discovery ”
on page 24 for more information.
• User name of the Sun StorEdge 6920 you want to discover.
• Password of the Sun StorEdge 6920 you want to discover.
Refer to the HP SIM documentation for more information on discovering storage systems with HP
SIM.
Discovery from HP SE
To discover Sun StorEdge 6920 storage systems:
1. Click Tools > Storage Essentials > Home on the HP SIM home page menu. The HP SE home
page opens in a separate web browser window. Click Discovery > Setup in the upper-right
pane of the HP SE home page window.
2. Select Step 1 at the top of the page.
3. Click the IP Addresses tab.
4. Click the Add Address button.
5. In the IP Address/DNS Name field, type the IP address or DNS name of the Sun StorEdge
6920 you want to discover.
6. Enter the User Name of the Sun StorEdge 6920 storage system.
7. Enter the Password used to access the Sun StorEdge 6920 storage system.
8. Retype the password in the Verify Password field.
9. In the Comment field (optional), type a comment for additional information. The information
typed into this field is displayed under the Comment column in the Addresses to Discover list
(Tools > Storage Essentials > Home > Discovery > Setup).
10. Do not select the Do Not Authenticate option.
11. Click OK.
12. To start discovering elements on the network, click the Start Discovery button on the IP
Addresses
tab.
Discovering Sun StorEdge 6130 Storage Systems
Discovery from HP SIM
To discover Sun StorEdge 6130 storage systems, provide the following information in HP Insight
Manager:
• IP address or system name of the controller or proxy you want to discover. See ” Adding an IP
Range for Scanning ” on page 23 or ” Adding a Single IP Address or DNS Name for Discovery ”
on page 24 for more information.