HP Storage Essentials NAS Manager Software - Manual (Page 98)

Discovering Filers, Tape Libraries, Switches and Storage Systems 68
IMPORTANT: The management server is unable to display logical volumes configured on Sun
StorEdge 3510 storage systems. Any logical volumes as well as the logical drives that comprise
them will not appear in the UI. There will be no indication that this happened.
Discovery from HP SIM
To discover Sun StorEdge 3510 storage systems, provide the following information in HP Insight
Manager:
• IP address or system name of the system running the Sun StorEdge 3510 SMI-S provider you
want to discover. See ” Adding an IP Range for Scanning ” on page 23 or ” Adding a Single IP
Address or DNS Name for Discovery ” on page 24 for more information.
• User Name of the system running the Sun StorEdge 3510 SMI-S provider.
• Password of the Sun StorEdge 3510 SMI-S provider.
Refer to the HP SIM documentation for more information about discovering storage systems with HP
SIM.
Discovery from HP SE
To discover Sun StorEdge 3510 storage systems:
1. Click Tools > Storage Essentials > Home on the HP SIM home page menu. The HP SE home
page opens in a separate web browser window. Click Discovery > Setup in the upper-right
pane of the HP SE home page window.
2. Select Step 1 at the top of the page.
3. Click the IP Addresses tab.
4. Click the Add Address button.
5. In the IP Address/DNS Name field, type the IP address or DNS name of the system running the
Sun StorEdge 3510 SMI-S provider you want to discover.
6. Enter the User Name of the system running the Sun StorEdge 3510 SMI-S provider.
7. Enter the Password of the system running the Sun StorEdge 3510 SMI-S provider.
8. Retype the password in the Verify Password field.
9. In the Comment field (optional), type a comment for additional information. The information
typed into this field is displayed under the Comment column in the Addresses to Discover list
(Tools > Storage Essentials > Home > Discovery > Setup).
10. Do not select the Do Not Authenticate option.
11. Click OK.
12. To start discovering elements on the network, click the Start Discovery button on the IP
Addresses tab.