HP Storage Essentials NAS Manager Software - Manual (Page 197)

Storage Essentials 5.00.01 User Guide 167
4. In the Repeat Interval field, type an interval. Select one of the following units from the
drop-down menu:
• Second(s)
• Minute(s)
• Hour(s)
• Day(s)
• Week(s)
NOTE: The higher the interval, the more demand there is on the management server.
5. Select the Enable option.
6. Click the Save Changes button.
Configuring the Clearing of Events
Depending on the severity of an event, the management server may mark the event as “clear” after
60 minutes. Events designated as Major and Critical are never marked as “clear.” You can change
the time delay in clearing an event, and you can specify that the management server never marks
an event as “clear”.
To help you in filtering events, you may want to have unimportant events marked as cleared rather
than automatically deleted. Depending on how you have configured the deletion of events, you can
view the “cleared” events at a later time.
See the following table for the default settings for clearing events.
To change the default time delay to clear an event, do the following:
1. Select Options > Events > Storage Essentials > Event Configuration.
2. Do one of the following:
• If you never want an event of the specified severity level marked as “cleared,” select the
Never option next to the severity level.
Table 18 Default Settings for Clearing Events
Severity Level Default Time Delay to Clear the Event (Hours)
Unknown 1
Informational 1
Warning 1
Minor 1
Major Never
Critical Never