HP Storage Essentials NAS Manager Software - Manual (Page 103)

Storage Essentials 5.00.01 User Guide 73
Discovery from HP SE
To discover a NetApp Filer:
1. Click Tools > Storage Essentials > Home > Discovery > Setup.
2. Select Step 1 at the top of the page.
3. Click the IP Addresses tab.
4. Click the Add Address button.
5. In the IP Address/DNS Name field, type the IP address or DNS name of the NetApp Filer you
want to discover.
6. Enter the User Name of the NetApp Filer. You must provide a privileged login.
7. Enter the Password used to access the NetApp Filer.
8. Retype the password in the Verify Password field.
9. In the Comment field (optional), type a comment for additional information. The information
typed into this field is displayed under the Comment column in the Addresses to Discover list
(Tools > Storage Essentials > Home > Discovery > Setup).
10. Do not select the Do Not Authenticate option.
11. Click OK.
12. To start discovering elements on the network, click the Start Discovery button on the IP
Addresses
tab.
Discovering Sun NAS Devices
NOTE: You do not need to provide the interop namespace because it is included in the
management servers list of default namespaces.
Discovery from HP SIM
To discover a Sun NAS Devices, provide the following information in HP Insight Manager:
• IP address or system name of the server running the SMI-S provider for the Sun NAS devices you
want to discover. See ” Adding an IP Range for Scanning ” on page 23 or ” Adding a Single IP
Address or DNS Name for Discovery ” on page 24 for more information.
• User name of the CIMOM/provider for the Sun NAS devices you want to discover. You must
provide a privileged login.
• Password used to access the CIMOM/provider for the Sun NAS devices you want to discover.
See the HP SIM documentation for more details if needed.
Discovery from HP SE
To discover a NetApp Filer:
1. Click Tools > Storage Essentials > Home > on the HP SIM home page menu. See
” Accessing the Discovery Pages for HP SIM and HP SE ” on page 17 if needed. Discovery >
Setup .