HP Storage Essentials NAS Manager Software - Manual (Page 367)

Storage Essentials 5.00.01 User Guide 337
1. To add a volume to the host security group, click the Add button in the upper-right corner of the
window.
2. Select a volume. Then, do one of the following:
• If you want the unit number to be selected automatically by the server, leave the Auto-Select
option selected.
• If you want to choose a unit number, deselect the Auto-Select option and enter the unit
number in the Unit Number field at the top of the window.
NOTE: Keep in mind that for Engenio storage systems LUN numbers cannot be duplicated,
and that the management server can use an existing LUN number if the access mode is “No
Access” for the created LUN.
3. Documentation available for the assigning LUN number.
4. Click Add at the bottom of the window.
The volume is added to host security group.
5. When you are done adding volumes, click the Close button.
6. To remove a volume from the host security group, click the button. To remove multiple volumes
from the list, select the volumes you want to remove and then click the Remove Selected
button.
7. Click Finish.
Editing Host Security Groups
To edit a host security group:
1. Click Tools > Storage Essentials > Provisioning Manager in HP Systems Insight Manager.
2. In the right pane, click the Storage Systems tab.
3. In the right pane, click the Provision button corresponding to the storage system in which you
want to access information about host security groups.
4. Click Step 3 Host Security Group.
5. Click the button corresponding to the host security group you want to edit.
Step 1 - Edit Details for the Host
1. Modify the name of the host security group.
NOTE: The ID for a host security group changes when you rename the host security group.
2. Change the port you want associated with the host security group. This port should contain your
LUNs.