HP Storage Essentials NAS Manager Software - Manual (Page 176)

Managing Security 146
1. If you are changing the SIM_MANAGER password and HP SIM and HP SE are using the same
Oracle database, you must complete the following steps.:
a. Log onto the server running HP Systems Insight Manager.
b. Stop the AppStorManager service if it is started.
c. Enter the following at the command prompt:
C:\> mxpassword -m -x MxDBUserPassword=mynewPass
where mynewPass is your new password for the database.
d. Stop the HP Systems Insight Manager service so that it cannot access the database. It is very
important that the HP Systems Insight Manager service does not access the database before
you are finished with changing the password for the database.
2. Stop the AppStorManager service.
3. To access the database utility, go to the %MGR_DIST%\Tools\dbAdmin directory on the
management server and double-click dbAdmin.bat, where [Install_Dir] is the directory
into which you installed the management server.
4. Click Change Passwords in the left pane.
5. Select an account name from the User Name combo box.
6. Type the current password in the Old Password field.
7. Type the new password in the New Password field.
8. Retype the password in the Confirm Password field.
9. Click Change.
The Database Admin Utility changes the password for the specified account.