HP Storage Essentials NAS Manager Software - Manual (Page 315)

Storage Essentials 5.00.01 User Guide 285
Once the button is enabled, the management server displays the link between the storage
system port and the port to the host as a dotted line, as shown in the following figure:
Figure 48 Direct Attached Storage in the Topology
In this figure, Slot A Port 1 belongs to the storage system and Adapter 1 Port 0 belongs to the host.
The dotted line indicates the storage system is directly attached to the host.
Filers
Element topology for a filer shows the connection from a host to the filer going through an IP cloud,
which represents the IP network.
Accessing the Topology
To access the Topology tab:
1. Access the management server.
2. Access the Topology tab by doing one of the following:
• Selecting an element in Application Viewer, and then clicking the Topology tab.
• Double-clicking an element in Capacity Manager or System Manager, and then clicking the
Topology tab.
• Right-clicking an element in System Manager, and then selecting Go To Element Topology
from the drop-down menu.