HP Storage Essentials NAS Manager Software - Manual (Page 393)

Storage Essentials 5.00.01 User Guide 363
NOTE: When additional information is not available for a data point, Show Details is disabled.
You can also obtained additional information from some of the charts that are displayed on the
bottom pane of the Topology tab, as described in the following table.
Table 56 Obtaining Additional Information
from a Chart on the Summary Tab
Right-click a bar
in the following chart
and select Show Details...
To view the Jobs tab
with the following...
Service Level Agreement Clients that were backed up. The failures are displayed
first. To obtain details about a job, select the job in the
Job tab and then expand the View the Details pane on
the far right. The status you right-clicked is highlighted in
the Jobs tab.
Backup Volume Clients in the backup sorted by size.
Windows Utilization Chart Clients sorted by duration of the backup. The time span
represented by the bar you clicked is highlighted in the
Jobs tab. For example, assume a bar in the Windows
utilization tab shows a duration of seven hours. You can
determine which jobs were running during that time by
right-clicking the bar and selecting Show Details. The
times represented by the bar are highlighted in the Jobs
pane.
Largest/Longest Jobs Clients in the backup, sorted by duration of the job.
Table 57 Show Details for Tabs on the Lower Pane
of the Topology Tab
Right-click a row in the following Tab
and Select Show Details...
To view...
Any data point on the Charts tab Displays the Jobs tab for the data point right-clicked.
Any element on the Servers tab Displays the Jobs tab for the element you right-clicked.
The jobs displayed correspond to the element you
right-clicked.
Any element on the Resources tab Displays the Media tab for the element you right-clicked.
Any element on the Media Pools tab Displays the Media tab for the elements contained
within the media pool you right-clicked.