Grass Valley 4300 Krystal Reference Manual v.3.1 - Manual (Page 96)

6-2 Krystal 4300 Reference
Section 6 — Run Control Menu
Path Control Menu
The path an effect takes between keyframes is automatically defined by the
system according to a default for each path parameter. The Path menu
allows you to modify these default parameters through selection of specific
types of motion parameters on a keyframe-by-keyframe basis.
When you are in a menu that has associated path control, the Path button
located in the User Assist area to the left of the display will show low tally.
This indicates you can press
Path to go to the Path Control menu for your
currently selected function. You can also double press the transform
Control Panel buttons to go directly to the Path Control menu for that trans-
form.
If you are in a menu that does not have path controls associated with it,
pressing the
Path top menu button located in the User Assist subpanel area
will bring up the following menu.
You use this menu to select the top menu tool category and individual func-
tion whose path parameters you wish to change.
Path Control menu functions:
TOOL CATEGORY — categorizes the path control available by the five top
menus and path associated with the Transformation buttons. The heading
above the SELECT/SCROLL dialogue box will change to match the
selected Tool Category.
PATH CONTROL
SELECT/
SCROLL
PATH
MENU >
PAGE
UP
Function
TRANSFORM TOOLS:
1. ALL
2. locate
3. rotate
4. size
5. spin
6. persp
7. skew
8. post
PAGE
DOWN
SCROLL
IN/OUTPUT
VIEW
KEY/STENCL
FRAME
PICTURE
TRANSFRMS
TOOL
CATEGORY