Grass Valley 4300 Krystal Reference Manual v.3.1 - Manual (Page 143)

Krystal 4300 Reference 7-35
Output Recursive Menu
OVER — places the live video or newest image on top of the trail.
UNDER — places the live video or newest image under the trail.
ERASE — erases a previously-created trail as you fly a new image over
the old trail.
Trails/Timing
The TIMING selection applies to all of the recursive modes and is discussed
near the end of this section on page 7-36 .
Trails/Wind
The TRAILS selection allows you to leave a trail of old images behind as you
fly an image around the screen. The WIND selection allows you to modify
the look of the trail by making it appear that wind is blowing if off the
screen.
To access the Trails/Wind selections shown below, press the RECURSIVE
MODE soft button to select TRAILS , and press the MODIFY soft button to select
WIND .
WIND — makes the trail appear as though a wind is blowing if off the screen.
The soft knobs described below determine how the wind affects the trail:
WIND ROTATION — sets the direction that the wind blows.
WIND VELOCITY — sets the speed of the wind.
LOOP — ON starts the recursive effect. OFF stops the recursive effect and
returns to live video.
Displayed:
Register:
Keyframe:
Cur.Time:
OUTPUT RECURSIVE
OFF
TRAILS
MONTAGE
MTN DECAY
FREEZE
TIMING
WIND
APPEARNCE
STROBE
OFF
ON
RECURSIVE
MODE
MODIFY LOOP
WIND VELOCITY
20.0000
WIND ROTATION
0.6000