Grass Valley 4300 Krystal Reference Manual v.3.1 - Manual (Page 93)

Krystal 4300 Reference 5-13
Macro Control Menu
3. Press the BEGIN RECORDING soft button which will bring up a keyboard
dialogue box in the menu display. You use this to name your macro.
You can use up to 15 characters for the macro name. Press OK when
finished naming the macro.
4. The Macro top menu button will flash while recording is taking place
and a dialogue box appearing in the menu display area will prompt
you to “Press the
Macro button again to stop recording”. After you have
pressed this button as directed, your macro will be completed and the
Macro button will stop flashing and return to high tally.
Macro Play
To playback a macro from the Krystal Control Panel, simply press the
yellow numbered
Macro button used to create the macro. Use the Macro
shift button to access macros 7-12.
You can also play a macro from a Qwerty Keyboard by pressing CTRL plus
one of the twelve function keys that map to the 12 macros (Macro 1-6 and
Macro Shift 1-6). For example CTRL, F1 plays Macro 1.
To playback a macro using the Krystal Macro Control menu, perform the
following steps:
1. Toggle to the PLAY mode using the MACRO MODE soft button.
2. Scroll to the desired macro shown in the Macro List box.
3. Press the BEGIN PLAYBACK soft button to play the macro. The small box at
the top center of the menu display will say “Macro Complete” when
playback is finished.
MACRO CONTROL
BEGIN
PLAYBACK...
SELECT/
SCROLL
DELETE
MACRO...
RENAME
MACRO...
PAGE
UP
Key Name
MACRO LIST:
1. [ 1] MACRO1
2. [ 2] MACRO2
3. [ 3] MACRO3
4. [ 4] DARK
5. [ 5] STAR
6. [ 6] empty
7. [S7] empty
8. [S2] empty
PAGE
DOWN
SCROLL
RECORD
PLAY
MACRO
MODE