beautypg.com

Combiner background menu, 4 channel combiner background – Grass Valley 4300 Krystal Reference Manual v.3.1 User Manual

Page 264

background image

11-28

Krystal 4300 Reference

Section 11 — Input/Output Menu

Combiner Background Menu

4 Channel Combiner Background

The Four Channel Combiner background is separate from the individual
channel backgrounds. However, only one background will be visible at a
time on an individual output. If a channel is using a background, it will be
passed on to subsequent combiner stages. Because that channel’s back-
ground fills the entire raster, if a combiner background is also selected it
will be hidden until the channel’s background is turned off. Also, the por-
tions of any other channels that are “behind” a channel using a background
will also be hidden.

Press

Input/Output

\

BACKGROUND >

\

COMBINER BACKGROUND >

to access the

Combiner Background menu shown below. (This menu is also accessible
from the Combiner Control menu when

OUTPUTS

is selected.) From this

menu you can adjust the background for the primary and secondary com-
biner outputs. These controls are only available when the Camera channel
is delegated and is the display channel (first channel delegated).

Press

MODIFY

to select the Primary or Secondary output, then press

BACKGROUND MODE

to select the desired background.

The combiner backgrounds of the primary and secondary outputs can be
any of the following:

VIDEO

— uses the externally input background video as the background.

Each Combiner Output module has a background input video connector,
which is used exclusively by the user of that output module. This same
video input is delivered to both the primary and secondary outputs if video
background is selected for these outputs.

S. BLACK

— provides a superblack for background (0 black).

Displ: Camera
Re: 1 - Register
KF: 1 of 5
Time: [0.00]

Primary

2ndary

OFF

MATTE

WASH

S BLACK

VIDEO

MATTE 2

MATTE 1

APPEARNCE

SECONDARY

PRIMARY

SPEED

POSITION

BACKGROUND

MODE

MODIFY

MODIFY

ROTATION

MODE

OFFSET

0.0000

ROTATION

0.0000

SLOPE

0.0000

COMBINER BACKGRND

A: Ch 1

B: Ch 2

C: Ch 3

D: Ch 4

Stage 3

D

Stage 2

D

Stage 1

D

This manual is related to the following products: