Grass Valley 4300 Krystal Reference Manual v.3.1 - Manual (Page 139)

Krystal 4300 Reference 7-31
Output Recursive Menu
Montage/Strobe
The MONTAGE selection allows you to create a montage of still images from
moving video by flying the moving video image around the screen. The
STROBE selection turns montage on and off at regular intervals.
To access the Montage/Strobe selections shown below, press the RECURSIVE
MODE soft button to select MONTAGE , and press the MODIFY soft button to
select STROBE .
LOOP — ON starts the recursive effect. OFF stops the recursive effect and
returns to live video.
KEYFRAME RESET — ON resets the loop and starts the effect over at each key-
frame where Keyframe Reset on. OFF does not change the frozen image at
each keyframe.
STROBE TYPE — sets type of strobe that will cause automatic capture of new
images or disables automatic capture. The selections and adjustments
below control the strobe cycle.
NONE — turns strobe off.
TIME — captures a new image at an adjustable time interval.
KEYFRAME — captures a new image at each keyframe.
When TIME is selected, the following soft knob appears:
PERIOD — makes the strobe cycle shorter or longer (shown in frames).
FORCE STROBE — forces the strobe to turn on or off, depending on whether
there is motion in the transform. ON strobes regardless of transform motion.
OFF strobes only if there is motion in the image transform.
OUTPUT RECURSIVE
Displayed:
Register:
Keyframe:
Cur.Time:
RECURSIVE
MODE
MODIFY LOOP KEYFRAME
RESET
STROBE
TYPE
FORCE
STROBE
OFF
ON
KEYFRAME
TIME
NONE
OFF
ON
OFF
ON
TIMING
APPEARNCE
STROBE
OFF
TRAILS
MONTAGE
MTN DECAY
FREEZE