Grass Valley 4300 Krystal Reference Manual v.3.1 - Manual (Page 132)

7-24 Krystal 4300 Reference
Section 7 — Picture Menu
Freeze/Appearance
The Freeze/Appearance selections allow you to capture a still image from
a moving video and/or key source and modify it.
To access the Freeze/Appearance selections shown below, press the RECUR-
SIVE MODE soft button to select FREEZE , and press the MODIFY soft button to
select APPEARNCE .
APPEARNCE — allows you to adjust the appearance of the freeze using the
selections and soft knobs described below:
PICTURE DECAY — causes frozen image to fade over time.
STAR DECAY — causes a random decay frozen image over time.
LOOP — ON starts the recursive effect. OFF stops the recursive effect and
returns to live video.
Note that the Freeze Video button in the Override area of the panel acts just like
the LOOP soft button when FREEZE recursive mode is selected in the Input
Recursive menu. Pressing the Freeze Video button turns on or off whatever
freeze effect has already been set up in the Input Recursive menu. The other
buttons in the Override area (
Freeze Key and Hold Input ) are non-functional.
KEYFRAME RESET — ON resets the loop by creating a new frozen image at each
keyframe that has Keyframe Reset on. OFF does not change the frozen
image at each keyframe.
STROBE TYPE — sets type of strobe that will cause automatic capture of new
images or disables automatic capture. The selections and adjustments
below control the strobe cycle.
NONE — turns strobe off (same as hard freeze).
TIME — freezes a new image at an adjustable time interval.
INPUT RECURSIVE
Displayed:
Register:
Keyframe:
Cur.Time:
RECURSIVE
MODE
MODIFY LOOP KEYFRAME
RESET
STROBE
TYPE
FREEZE
SOURCE
PERIOD
0.0000
STAR DECAY
0.0000
PICTURE DECAY
0.0000
KEY
VIDEO
VIDEO&KEY
KEYFRAME
TIME
NONE
OFF
ON
OFF
ON
MASK
TIMING
APPEARNCE
OFF
MTN DECAY
FREEZE
ON TIME
0.0000