Outputs – Grass Valley 4300 Krystal Reference Manual v.3.1 User Manual
Page 257
Krystal 4300 Reference
11-21
Combiner Menus
CHANNEL DEPTH MODE
— Selects the type of depth information output for the
delegated channel.
Selecting
FIXED
allows the depth to be determined by the setting of the
CHANNEL DEPTH
soft knob. The same depth value is applied to the entire
surface of the picture, even when it has been rotated in 3-D space.
Selecting
VARIABLE
, allows depth to be determined by the 3-D space
location of the delegated channel. Different depth values will be
assigned to different portions of the picture when it is rotated in 3-D
space.
The
CHANNEL OPACITY
soft knob adjusts the picture opacity of the dele-
gated channel.
The final opacity of a channel is determined by multiplying the values for
Picture opacity, Crop opacity, Corner Pinning View Through opacity, and
Combiner Channel opacity. See Final Picture Opacity
for more
information.
Outputs
Press
MODIFY
to select
OUTPUTS
to display the following menu. From this
menu you control what is delivered to the primary and secondary com-
biner outputs, and these signal paths are graphically displayed on the
menu screen. Any one of the four input channels or any one of the three
stages can be assigned to the secondary output. These controls are active
only when the Camera channel is delegated
SECONDARY OUTPUT
— Selects what signal is delivered to the secondary
output.
SECONDARY ISO
— Removes the channel or stage selected for Secondary
Output from the primary output (it is isolated to the secondary output).
COMBINER CONTROL
Displ: Camera
Re: 1 - Register
KF: 1 of 5
Time: [0.00]
Primary
2ndary
INPUT
OUTPUTS
CHANNEL
COMBINING
NONE
STAGE 3
STAGE 2
STAGE 1
CHANNEL 4
CHANNEL 3
CHANNEL 2
CHANNEL 1
OFF
ON
MODIFY
SECONDARY
OUTPUT
SECONDARY
ISO
COMBINER
BACKGROUND >
A: Ch 1
B: Ch 2
C: Ch 3
D: Ch 4
Stage 3
D
Stage 2
D
Stage 1
D