Grass Valley 4300 Krystal Reference Manual v.3.1 - Manual (Page 137)

Krystal 4300 Reference 7-29
Output Recursive Menu
Freeze/Appearance
The Freeze/Appearance selections allow you to capture a still image from
a moving video source and modify it. To access the Freeze/Appearance
selections shown below, press the
RECURSIVE MODE soft button to select
FREEZE , and press the MODIFY soft button to select APPEARNCE .
APPEARNCE — allows you to adjust the appearance of the freeze using the
selections and soft knobs described below:
PICTURE DECAY — causes freeze to fade away over time.
STAR DECAY — causes a random decay frozen image over time.
LOOP — ON starts the recursive effect. OFF stops the recursive effect and
returns to live video.
KEYFRAME RESET — ON resets the loop by creating a new frozen image at each
keyframe that has Keyframe Reset on. OFF does not change the frozen
image at each keyframe.
STROBE TYPE — sets type of strobe that will cause automatic capture of new
images or disables automatic capture. The selections and adjustments
below control the strobe cycle.
NONE — turns strobe off.
TIME — freezes a new image at an adjustable time interval.
KEYFRAME — freezes a new image at each keyframe.
When TIME is selected, the following soft knobs appear:
PERIOD — makes the strobe cycle shorter or longer (shown in frames).
ON TIME — sets the length of time that the image is unfrozen (shown as
a percentage of the period).
OUTPUT RECURSIVE
Displayed:
Register:
Keyframe:
Cur.Time:
RECURSIVE
MODE
MODIFY LOOP KEYFRAME
RESET
STROBE
TYPE
STAR DECAY
0.0000
PICTURE DECAY
0.0000
ON
KEYFRAME
TIME
NONE
OFF
ON
OFF
ON
TIMING
APPEARNCE
OFF
TRAILS
MONTAGE
MTN DECAY
FREEZE