Grass Valley 4300 Krystal Reference Manual v.3.1 - Manual (Page 237)

Krystal 4300 Reference 11-1
Section
11
Input/Output Menu
Introduction
Input/Output tools are used to set the behavior of different sources
entering and leaving the Krystal system.
Press the Input/Output top menu button to access the top level menu shown
below.
From this menu you can access the submenus described in detail on the fol-
lowing pages. Input/Output lower level menus include:
SOURCE SELECT > — defines where the sources for video, key and mask come
from. It is possible to select different sources for the front or back sides of
the video on a keyframe by keyframe basis.
MATTE FILL > — adds matte fill to the picture, the mask, or the picture and
the mask. Different matte fill selections can be made for the front and back
sides of the video, key, or mask signal.
H/V REVERSE > — provides separate controls for reversing the front and back
sides of the picture, both horizontally and vertically.
INPUT/OUTPUT
Displayed:
Register:
Keyframe:
Cur.Time:
SOURCE
SELECT >
MATTE
FILL >
H/V
REVERSE >
MOTION
DETECTION >
OUTPUT
CONTROL >
GLOBAL
ASSIGN >
BACKGROUND
>
COMBINER
CONTROL >