Grass Valley 4300 Krystal Reference Manual v.3.1 - Manual (Page 233)

Krystal 4300 Reference 10-15
Axis Lock Menu
Axis Lock Menu
Use Axis Lock to lock the axis to the picture so that when you perform a
transform the axis keeps the same spatial relationship to the picture.
To access this menu, press the View button located in the Top Menu area
then select the AXIS LOCK> button to bring up the menu shown below. You
can also double press the Locate Axis button located in the Transform sub-
panel area to bring up this menu.
Soft Buttons used with the Axis Lock submenu are:
AXIS LOCK — enables or disables the lock mode.
ON — keeps the axis locked with the channel during a transform,
causing the axis to move with the picture.
OFF — leaves the axis at its current location when the channel moves.
AXIS LOCK
Displayed:
Register:
Keyframe:
Cur.Time:
AXIS
LOCK
OFF
ON