Grass Valley 4300 Krystal Reference Manual v.3.1 - Manual (Page 217)

Krystal 4300 Reference 9-23
Emboss Menu
Emboss Adjustable Matte
Press the MATTE TYPE button to highlight the ADJUSTBLE parameter to bring
up the following menu:
Soft buttons used with this menu are:
ENABLE LEAD — used to enable and disable the leading edge emboss.
ENABLE TRAIL — used to enable/disable the trailing edge emboss.
ADJUST EDGE — This soft button is available when BOTH ENABLE LEAD and
ENABLE TRAIL are set to ON . Use to adjust the Lead edge, Trail edge, or both
at the same time. A plus (+) sign will appear before the soft knob function
name when
BOTH has been selected.
HUE ROTATE — This soft button is available when ADJUST EDGE is not on
“both” or one of ENABLE LEAD and ENABLE TRAIL is “ON”. When ON , controls
the hue rotation speed; when OFF , controls the hue.
Soft knobs used with all three of the ADJUST EDGE selections used in this
menu are:
SATURATION sets the saturation of the emboss matte.
BRIGHTNESS sets the brightness of the emboss matte.
HUE sets the hue of the emboss matte.
EMBOSS
Displayed:
Register:
Keyframe:
Cur.Time:
EMBOSS MODIFY MATTE
TYPE
OUTLINE
OFF
MONO
APPEARNCE ON
MATTE
HUE
ROTATE
OFF
ON
TRAIL HUE
0.0000
TRAIL BRIGHTNESS
0.0000
TRAIL SATURATION
0.0000
ENABLE
LEAD
ENABLE
TRAIL
ADJUST
EDGE
LEAD
BOTH
OFF OFF ADJUSTBLE TRAIL
ON ON