Grass Valley 4300 Krystal Reference Manual v.3.1 - Manual (Page 129)

Krystal 4300 Reference 7-21
Mosaic Menu
Mosaic Menu
The Mosaic menu is available if the Input Recursive option is installed.
Press the
Picture Top Menu button then select the MOSAIC> soft button to
bring up the menu shown below.
Use this menu to impose a tile pattern onto the video and/or key signal.
MOSAIC turns the mosaic function on or off.
Soft Knob controls include:
TILE SIZE — sets the tile size. Range is 0 to 100.
TILE ASPECT — varies the tile aspect ratio horizontally or vertically.
Range is -1 to +1.
TILE RANDOMNESS — creates a tile pattern which is random in size and
aspect ratio. Range is 0 to 100.
MOSAIC SOURCE selects the source affected by the mosaic: video, key, or both.
PICTURE MASK turns mask on or off. Masks come from the mask bus and
allow you to apply the mosaic to selected areas of the image while others
remain unaffected.
ADJUST MASK> opens the ADJUST MASK menu located under the Key/Stencil
menu, where you can select and adjust the mask.
See Section 9-Key/Stencil Menu for information about using masks.
MOSAIC
Displayed:
Register:
Keyframe:
Cur.Time:
MOSAIC MOSAIC
SOURCE
ADJUST
MASK >
PICTURE
MASK
TILE RANDOMNESS
0.0000
TILE ASPECT
0.0000
TILE SIZE
2.0000
OFF KEY
VIDEO
OFF
ON ON
VIDEO & KEY