Grass Valley 4300 Krystal Reference Manual v.3.1 - Manual (Page 134)

7-26 Krystal 4300 Reference
Section 7 — Picture Menu
KEYFRAME RESET — ON resets the loop by creating a new frozen image at each
keyframe that has Keyframe Reset on. OFF does not reset the loop at each
keyframe.
Timing
The Timing selection applies to both the FREEZE and MTN DECAY recursive
modes and allows you to select the timing, determining when the recursive
effect is written to memory and when and how it is read out of memory.
To access the Timing selections shown below, press the RECURSIVE MODE soft
button to select FREEZE or MTN DECAY , and press the MODIFY soft button to
select TIMING .
LOOP — ON starts the recursive effect. OFF stops the recursive effect and
returns to live video.
START WRITE — selects which field will be the first (of two) to be written into
memory when a freeze is initiated: the next odd field, the next even field,
or the next field of any type.
READ TIMING — selects a method for reading the recursive effect out of
memory. Choices are listed below:
ADAPT — displays both fields. Where motion is detected a field-based
freeze is used, and where motion is not detected a frame based freeze is
used.
REPEAT — replays one field to synthesize the other. Image may contain
artifacts, such as stairsteps, on diagonal lines.
INTERP — replays one field to synthesize the other, but removes artifacts
by averaging between adjacent lines.
INPUT RECURSIVE
Displayed:
Register:
Keyframe:
Cur.Time:
RECURSIVE
MODE
MODIFY LOOP START
WRITE READ
TIMING
DISPLAY
FIELD
EVEN
ODD
FRAME
INTERP
REPEAT
ADAPT
EVEN
ODD
ANY FIELD
OFF
ON
MASK
TIMING
APPEARNCE
OFF
MTN DECAY
FREEZE