Grass Valley 4300 Krystal Reference Manual v.3.1 - Manual (Page 100)

6-6 Krystal 4300 Reference
Section 6 — Run Control Menu
All Transform Paths Menu
Selecting ALL from the Path Control Menu brings up the All Transforms
Paths menu. This menu lets you modify the paths for all the transform
parameters at that keyframe.
The current path for each transform parameter is viewed by pressing the
corresponding transform buttons located next to the joystick (
Size/Locate ,
Rotate , Spin , etc.). Text appears on the menu indicating what transform
values have been assigned to the joystick and selected for display. When
Menu Ctrl , Locate Axis or Aspect is assigned, Locate parameter values will be
displayed. Menu items are gray for transforms that are not active in that
keyframe. You cannot affect the paths when an inactive transform is
selected (gray menu items). You must either assign an active transform to
the joystick, or make an inactive transform assigned to the joystick active
by changing it, before you will be able to apply a change to all the transform
paths for that keyframe.
Note The buttons in the All Transform Path menu must be pressed to affect a change.
Only Active and Changed transforms are affected by changes in this menu.
OFF
ON
S-LINEAR
LINEAR
SMOOTH
CURVE
HOLD PATH
TYPE
CONTINUITY
0.0000
TENSION
0.0000
BIAS
0.0000
Displayed:
Register:
Keyframe:
Cur.Time:
LOCATE values displayed.
ALL TRANSFORM PATHS