Grass Valley 4300 Krystal Reference Manual v.3.1 User Manual
Page 55
Krystal 4300 Reference
2-19
Run Area
When selected, the
Stop Next
button causes an effect to stop at the next
master timeline keyframe when the
Run
button is pressed.
Pressing the
Reverse
button causes the effect to run backwards. It may be
pressed before or during the effect run. If the
Reverse
button is pressed
while the effect is running, the effect will immediately change directions.
Pressing the
Rewind
button positions the effect at either the beginning or end
of the effect depending on the status of the reverse button. If an effect is
running when this button is pressed, the effect run stops and the effect
returns to the beginning or end.
Pressing the
Run
button causes the effect to be run in its entirety (provided
the Stop Next button is not on and there are no effect pauses). Successive
presses of the
Run
button may be used to stop and re-start the effect during
the run.
Tally Information —
Run
has three states. While the effect is running, the
button is high tally. When the effect is idle and the current effect has
keyframes, it is low tally. When the effect is idle and the current effect
does not have any keyframes,
Run
is off.
Pressing the
Loop
button toggles the Loop Control function off if it is cur-
rently on, and on if it is currently off. This is equivalent to going to the Loop
Control Menu and pushing the
LOOP ENABLED
soft button.
Tally Information — The
Loop
button is high tally when the Loop
Control function is ON, and is off when the Loop Control function is
off.
Stop
Next
Reverse
Rewind
Run
Loop