Grass Valley 4300 Krystal Reference Manual v.3.1 - Manual (Page 142)

7-34 Krystal 4300 Reference
Section 7 — Picture Menu
ON TIME — sets the length of time that the image is unfrozen (shown as
a percentage of the period).
FORCE STROBE — forces the strobe to turn on or off, depending on whether
there is motion in the transform. ON strobes regardless of transform motion.
OFF strobes only if there is motion in the image transform.
Trails/Appearance
The TRAILS selection allows you to leave a trail of old images behind as you
fly an image around the screen. The APPEARNCE selection allows you to
modify the look of the trail.
To access the Trails/Appearance selections shown below, press the RECUR-
SIVE MODE soft button to select TRAILS , and press the MODIFY soft button to
select APPEARNCE .
APPEARNCE — allows you to adjust the appearance of the trail using the
selections and soft knobs described below:
TRAIL DECAY — sets rate at which trail fades away.
STAR DECAY — sets rate at which trails randomly decay away.
BLUR — sets amount of blur in the trails.
LOOP — ON starts the recursive effect. OFF stops the recursive effect and
returns to live video.
SHOW PICTURE — YES displays the moving video image in addition to the
trail. NO displays only the trail without the moving video image.
TRAIL MODE — these selections determine whether the newest image
appears over or under the trail. Also includes a mode for erasing a trail.
OUTPUT RECURSIVE
Displayed:
Register:
Keyframe:
Cur.Time:
RECURSIVE
MODE
MODIFY LOOP SHOW
PICTURE
TRAIL
MODE
BLUR
0.0000
STAR DECAY
0.0000
TRAIL DECAY
0.0000
ERASE
UNDER
OVER
NO
YES
OFF
ON
TIMING
WIND
APPEARNCE
STROBE
OFF
TRAILS
MONTAGE
MTN DECAY
FREEZE