Register operations menu, Copy – Grass Valley 4300 Krystal Reference Manual v.3.1 User Manual

Page 85

Krystal 4300 Reference

5-5

File Operations Menu

Register Operations Menu

Register Operations allow you to move Krystal keyframe data from one
register to another, and permits you to delete data from Krystal registers.
Register operations require that an Effect Manager be acquired and on-line.
If an Effect Manager is not acquired or on-line, registers operations will not
occur and no message will be displayed.

The Register Operations menu is accessed by pressing the

File Oper.

top

menu button, and then pressing the

REGISTER OPER.

> soft button.

The register scroll pane is for display of register data only. No selections can
be made in the scroll pane. Instead register numbers are entered using the
Krystal Control Panel keypad.

The

KEYPAD ENTRY

soft button readies the keypad for entry of a “from” reg-

ister number.

Copy, Swap, Erase, Append, and Move register operations are supported.

Copy

The Copy function copies keyframe data from one register or block of reg-
isters to another register or block of registers. The original data remains
unaffected. To copy register data from the Register Operations menu:

Select

COPY

with the

OPERATION

soft button.

Select whether you want to copy a

SINGLE

BLOCK

of registers

with the

AFFECTED REGISTERS

soft button.

Enter the register(s) to copy from by pressing the register number in the
keypad followed by the

Enter

button. Enter the register to copy to (or, in

the case of copy block, the first register number to copy to) in a similar
manner.

REGISTER OPERATIONS

AFFECTED

REGISTERS

KEYPAD

ENTRY

PAGE

DOWN

COPY...

SCROLL

Effect Name

Channels Used Effect Duration

To Copy register 1 to register 2, press Copy.

00. Register 0

1 . . . . G1 C

3:00

01. Jack

1 2 3 4 G1 C

5:00

02. Straw

1 2 3 . C

2.15

03. Wichitah

1 2 3 4 G1 G2 C