Grass Valley 4300 Krystal Reference Manual v.3.1 - Manual (Page 179)

Krystal 4300 Reference 8-33
Kurl Menu
Slits Modulation
Press the KURL MODE soft button to highlight the SLITS mode then press
MODIFY to select MODULATN to access the Slits menu shown below:
Slits Modulation menu functions include:
PHASE MODE — used to set the slits to LOCKED or MOVING .
Soft Knobs controls available are:
AMPLITUDE — defines the amplitude of the modulation pattern applied
to the two sets of alternating slits.
FREQUENCY — defines the frequency of the modulation pattern and,
therefore, the number of cycle patterns affecting the slit displacement.
PHASE — determines the starting point or phase of the modulation to
occur at the center point. PHASE becomes SPEED when the PHASE MODE is
set to MOVING .
HORIZONTAL ADJUST — moves the position of all slits relative to the input
image.
KURL
Displayed:
Register:
Keyframe:
Cur.Time:
KURL
MODE
KURL
MODE
OFF
---
SPLASH
RINGS
OFF
SPHERE
SIZE MOD
POS MOD
PAGE ROLL
MODIFY
PATTERN
POSITION
PAGE TURN
RIPPLE
PHASE
0.0000
FREQUENCY
2.0000
HORIZONTAL ADJUST
0.0000
AMPLITUDE
0.0000
SLITS MODULATN
PHASE
MODE
MOVING
LOCKED