TeeJet Legacy 6000 CAN Guide - Manual (Page 48)

2-18 Chapter 2 - Getting Started
Implement Setup
Fieldware for the Legacy 6000
Software Version 2.11
Completing Implement Setup
When all swaths and sections have been properly setup, the last Implement Setup page is the Fin-
ish page. There are two buttons on the Finish page: a Review Configuration button and a Save to
SSM (Switch Sense Module) button.
Pressing the Review configuration button will display all of the implement setup settings that have
just been entered (Figure 2-15).
The Save to Switch Sense Module (SSM) button will send the current Implement configuration
parameters to the Switch Sense Module.
Figure 2-25: The Implement Setup Finish Page
Save to SSM Button
Review Button