TeeJet Legacy 6000 CAN Guide - Manual (Page 35)

Fieldware for the Legacy 6000
Software Version 2.11
Chapter 2 - Getting Started 2-5
Software Overview
Setup Menu Page
A Setup Menu page (Figure 2-6) is a page that contains all of the setup parameters associated
with a particular setup theme, such as GPS Receiver. A Setup Menu page can be divided into
three columns, Left, Center and Right. The Left and Right columns are made up of software but-
tons adjacent to a physical key on the console. The center column is a scrollable list containing the
name of every setup parameter and its current value. Navigate to the center column using the up
and down arrow keys on the console (Figure 2-1). To edit any of these settings, highlight the
desired setting in the center column and press the enter key on the console. This action typically
selects a Data Entry page (Figure 2-7) and (Figure 2-8).
Setup Wizard
Typically the top item in the center column list is a setup wizard. This setup wizard sequentially
steps through each setup parameter Data Entry page, allowing the editing of that setting, and then
continuing on to the next setup parameter. This is a convenient method for new users, who are
unfamiliar with all of the setup parameters.
Setup Sub-Groups
In some Setup Menu pages there are sub-group buttons in the right and left columns. Pressing
one of these displays only the setup parameters associated with that sub-group, in the center col-
umn. For example, in GPS Receiver setup (Figure 2-6) there are three sub-group buttons. The
Globe button (right column) will display all setup parameters associated with GPS Receiver setup,
the next button down is the sub-group for receiver accuracy. Pressing this button reduces the
items in the center column to setup parameters associated with GPS accuracy, eliminating all of
the items associated with the other sub-groups.
Exiting a Setup Menu Page
There are two ways to exit a Setup Menu page: “Save and Exit” and “Exit with out saving
changes”. To exit the setup with out saving changes, press the back arrow button located at the
top of the left column. To exit and save any changes you made, press the forward arrow at the top
of the right column. Either of these methods returns you to the Launcher page that the setup menu
was accessed from.
Figure 2-6: Example of a Setup Menu Page
Left Column Center Column Right Column
Sub-group
buttons
Forward Arrow
Save & Exit
Back Arrow
Exit & No Save
Highlighted Setup
Parameter