TeeJet Legacy 6000 CAN Guide - Manual (Page 120)

4-6 Chapter 4 - Real-time Operation
Product Application
Fieldware for the Legacy 6000
Software Version 2.11
Information Page Soft Keys Descriptions
Soft-key Description
The Exit soft-key. When pressed Fieldware ARM exits out of the real-time pro-
cess and returns to the Main Menu page.
The Next Page soft-key. Pressing this soft-key switches between the map page
and the rates page.
The Alternate Rates Page soft-key. Press this to view additional product infor-
mation, such as sensor and monitor status and current implement width.
The Stop Alarm soft-key. Press this to mute an alarm.
Manual Rate Increase soft-key. This soft-key is visible when the product control
is set to Manual mode. Use this soft-key to manually increase the product
application rate.
Manual Rate Decrease soft-key. This soft-key is visible when the product con-
trol is set to Manual mode. Use this soft-key to manually decrease the product
application rate.
The CAN Process soft-key. When pressed this soft-key launches the CAN Pro-
cess diagnostic. This is used Mainly to access Test Speed but can be used to
trouble shoot the CAN modules when running in real-time.
Re-fill soft-key. When this soft-key is visible and pressed the remaining volume
is reset to the Initial Quantity entered in the Product Setup.