Exiting real-time operation, Figure 4-45: exiting real-time application, Fieldware-map manager – TeeJet Legacy 6000 CAN Guide User Manual
Page 148: Exiting real-time operation -34, Fieldware-map manager -34

4-34
Chapter 4 - Real-time Operation
Exiting Real-Time Operation
Fieldware for the Legacy 6000
Software Version 2.11
Exiting Real-Time Operation
To exit from real-time operation, press the Exit button located on the bottom left hand cor-
ner of the current page. If data is being stored to the PC card, the exiting process may
take a minute or so to properly store this data.
Fieldware-Map Manager
Some Legacy 6000 system kits include Fieldware Tools for an office computer or laptop. Fieldware
Map Manager Tools can be used to view application as applied maps. Figure 4-46 shows an as-
applied map (RCD) and field boundary (BND) in the Map Manager view. To view as applied maps,
copy the record files (RCD) from the PC card to a desktop or laptop computer. Review 98-05048
Fieldware Tools user guide for instructions on how to generate application reports from the data.
Figure 4-45: Exiting Real-time Application
Figure 4-46: As- Applied Data Viewed in Map Manager