TeeJet Legacy 6000 CAN Guide - Manual (Page 38)

2-8 Chapter 2 - Getting Started
Console Setup
Fieldware for the Legacy 6000
Software Version 2.11
Console Setup
Console Setup defines system environment settings (units, language, time) that are displayed on
the console and used in the rate control and guidance applications.
To change any of the system environment settings, highlight the setting name, listed in the center
column of the Setup page, and press enter. Use the Setup Wizard to walk through all setup options
and select the appropriate settings. When done making changes, press the forward arrow to save
and exit Setup. Press the back arrow to exit and not save any changes. This procedure will hold
true for Console, Lightbar and GPS Receiver Setup.
.
Figure 2-10: The Console Setup Menu Page
Setting Description
PC Card Indicates to the Legacy 6000 system that a PCMCIA data card is being used.
Units Defines the system units: Metric or US.
Language Defines the system language.
System Date Sets the system date.
Date Format Defines the date format that will be displayed on the console. Settings are MM/DD/YY or DD/MM/
YY.
System Time Sets the system time.
Time Format Defines the time format to be displayed on the console. Settings are 12 hr. and 24 hr.
Time Zone Sets the time zone the Legacy 6000 system is operating in.
Speaker Sets the system speaker option: internal or external.
Volume Sets the speaker volume.
Table 2-2: Console Setup Settings